DuraSeal Heat Shrink Solder Splices is One piece design，it consists of transparent heat shrinkable sleeve and fluxed solder. Provides insulation easily and lower the installed cost.
Back to list >> 
DuraSeal Heat Shrink Solder Splices is One piece design，it consists of transparent heat shrinkable sleeve and fluxed solder.
Provides insulation easily and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube，it’s very
convenience to use the exact wire dimension.
Features:
>Shrinking ratio 2:1
>Waterproof for wiring splices
>Transparent sleeve provides precise inspection
> High Tensile Strength
>Easy control soldering process
Operating Termperature Range:
>Operating Temperature : -55˚C~125˚C
>Fully Recovery Temperature : 130˚C
>Temperature of fully solder melt : 150˚C
| Item | Value |
| Temperature Application Range | -55˚C~125˚C (Butt Joint) |
| Shrinking Temperature | >115℃ |
| Dielectric strength | 1KV |
| Protection Type | IP 67 |
| Model | Color | Before Shrinking(mm) | After Shrinking(mm) | Solder Ring | Length (L) | ||||
ID (a) | Thick (b) | ID | Thick | ID (c) | Thickness (d) | Length (e) | |||
DHSSS-1 | Clear | 2.0±0.1 | 0.30±0.05 | 1.1±0.1 | 0.50±0.05 | 1.8±0.1 | 0.3±0.05 | 2.0±0.1 | 40±0.5 |
DHSSS -2 | Red | 3.2±0.2 | 0.38±0.05 | 1.5±0.1 | 0.55±0.05 | 2.9±0.1 | 0.45±0.05 | 2.5±0.1 | 40±0.5 |
DHSSS -3 | Blue | 5.0±0.2 | 0.40±0.05 | 2.6±0.1 | 0.78±0.05 | 4.6±0.1 | 0.48±0.05 | 2.5±0.1 | 40±0.5 |
DHSSS -4 | Yellow | 6.5±0.2 | 0.40±0.05 | 3.0±0.1 | 0.80±0.05 | 6.2±0.1 | 0.5±0.05 | 3.5±0.1 | 40±0.5 |