Website:www.dicoretubing.com Date:2020-04-03
As you see in the picture above , it is a kind of heat shrink tubing that can be used on all kinds of racket handles . It can make handles looks more beauty and non-slip , so we named it non-slip heat shrink tubing (NHST)
The surface is scrub , and Mesh stripe . You can choose the favor color for your racket .
As all know , the two sides are different size for most of racket , so when you choose the size of heat shrink tubing , you should according the larger side . When you get it , you just need cut a piece of non-slip of heat shrink tubing according the length of your racket handle . Then heat it by hot gun , until it cover your racket handle tightly .
Please check the data before your purchase non-slip heat shrink tubing
SIZE | As supplied(mm) | After shrinkage(mm) | Standard | ||
I.D | W.T | I.D | W.T | Length/M | |
Φ10 | ≥Φ10 | 0.45±0.15 | <Φ6.0 | 0.80±0.15 | 0.3 |
Φ15 | ≥Φ15 | 0.45±0.15 | <Φ8.0 | 0.85±0.15 | 1.0 |
Φ20 | ≥Φ20 | 0.50±0.15 | <Φ11.0 | 0.90±0.15 | 0.8/1.0/1.6 |
Φ22 | ≥Φ22 | 0.50±0.15 | <Φ12.5 | 0.90±0.15 | 0.8/1.0/1.6 |
Φ25 | ≥Φ25 | 0.50±0.15 | <Φ14.5 | 1.00±0.15 | 0.8/1.0/1.6 |
Φ28 | ≥Φ28 | 0.50±0.15 | <Φ15.5 | 1.00±0.15 | 0.8/1.0/1.6 |
Φ30 | ≥Φ30 | 0.60±0.15 | <Φ17.5 | 1.20±0.15 | 0.8/1.0/1.6 |
Φ35 | ≥Φ35 | 0.60±0.15 | <Φ20.0 | 1.20±0.15 | 0.8/1.0/1.6 |
Φ40 | ≥Φ40 | 0.60±0.15 | <Φ23.0 | 1.20±0.15 | 0.8/1.0/1.6 |
Φ45 | ≥Φ45 | 0.65±0.15 | <Φ25.0 | 1.25±0.15 | 0.8/1.0/1.6 |
Φ50 | ≥Φ50 | 0.65±0.15 | <Φ28.0 | 1.25±0.15 | 0.8/1.0/1.6 |
Author: Gaven
2021-07-29
This is a video we shot for one of our customer to remind him something he should pay attention .
2020-09-10
When the diameters of heat shrink tubing and cable are similar , you shouldmake sure the duanl wall heat shrink tubing be compeletely shrink .
2020-07-23
We are a heat shrink tubing manufacturer , this vedio shows expanding process of heat shrink tubing .